Author Archives: ainadmin

About ainadmin

AIN Plastics, a division of ThyssenKrupp Materials NA, Inc., is a leading full line distributor and fabricator of industrial plastic shapes, specializing in engineering plastics for the fabricator and OEM communities.

AIN Plastics Participates in World Health and Safety Day with tkmna

It’s been a busy, active and fun year so far at AIN Plastics. Already this year we have had charity golf outings, 5K run walk events, bike rides and much more. This year’s annual World Heath and Safety Day at tkmna was no exception. thyssenkrupp Director of Safety Programs & 6S, Derek Overly, noted that the event had primarily focused on employee safety in past years. But this year the company wanted to add to the health side of the day. In fact, thyssenkrupp’s motto for this year was one word “Movement”! On the schedule was a lunch and learn featuring Dr. Barry Franklin from Beaumont Health and AIN Plastics, Markala Goodson, who spoke about the company group called tkactive. The day ended in a 5k Run Walk event for all employees.

Guest speaker, Dr. Barry Franklin presented great information on the importance of an active lifestyle

Guest speaker, Dr. Barry Franklin presented great information on the importance of an active lifestyle

Dr. Franklin provided an entertaining discussion of how everyone can do easy things to improve their health and create a healthy lifestyle no matter your age or current level of activity. Along with this, two lucky people took home a new fitbit, a great way to help track progress and keep you on track with fitness and healthy eating goals.

Next up in the day, Markala Goodson, presented information about thyssenkrupp’s tkactive program which is open to all tkmna employees. The group initially began in the AIN Plastics Division as AINFit.  AIN’s goal was to create a fun way to promote a healthy and active lifestyle and to support each other whoever we are. AINFit has an active FitBit group where you will find members challenging and cheering each other on as they meet their step goals. AINFit members also challenge each other with monthly contests and team up for everything from 5K run walks, to Mud Runs, and Bike rides. It’s been a great way to keep in contact with everyone and to work as a team even though our branches extend from the East coast to Dallas.

Markala Goodson, AIN Plastics Associate presented tkactive at World Health and Safety Day

Markala Goodson, AIN Plastics Associate presented tkactive at World Health and Safety Day

Some members of AINFit began by walking and have gone on to run their first 10Ks and beyond! The AINFit program has now gone company-wide and become tkactve. It’s free to employees, and has a simple goal of providing tips and information to achieve and maintain a healthy active lifestyle and to support each other. To that end Markala is always looking to add local 5K run walks, bike rides, and other activities employees can take part in. She is also doing contests for tkactive participants and keeps everyone up to date on the tkactive Twitter.

For World Health and Safety Day, Markala also brought in Catherine A. Smith, Executive Director/Vice President, Development, Midwest Affiliate from the American Heart Association. The Michigan area tkactive team joined in the annual Heart Walk in Detroit on May 14. In support of the

Markala Goodson, AIN Plastics Sales and Marketing Associate with Catherine A. Smith of the American Heart Association

Markala Goodson, AIN Plastics Sales and Marketing Associate with Catherine A. Smith of the American Heart Association

American Heart Association, thyssenkrupp will do a donation to the association for every employee that takes part.

On March 7, thyssenkrupp’s WE Move the World event began, a global step event for all employees of thyssenkrupp around the world. tKMNA’s Southfield office stepped it up on World Health and Safety Day with a 5K run walk and, in spite of the cold rainy day, the turnout was great and everyone enjoyed the course that lead everyone through a local neighborhood and park.

Other events for the day included a safety talk and some great healthy breakfasts, snacks, and lunches at other locations including AIN Plastics Kennesaw and Dallas. Topping it off, AIN Plastics Canton did their first 5K as a team and got the gear too!

AIN Plastics Canton does their Fit Gear
and they’re off! walkers and runners starting out on the Southfield 5K
AIN Plastics and everyone with tk One Source enjoy lunch for World Health and Safety Day
AIN Kennesaw laid out healthy snacks and hosted a safety meeting to keep everyone on track.
Last year AIN Plastics Michigan took part in the Corporate Field Day and they will be back – better than ever in 2016
thyssenkrupp Southfield added steps to the WE Move the World event with a 5K
Markala Goodson, AIN Plastics Associate presented tkactive at World Health and Safety Day
Derek Overly is the host for the day at Southfield thyssenkrupp’s World Health and Safety Day
Guest speaker, Dr. Barry Franklin presented great information on the importance of an active lifestyle
Markala Goodson, AIN Plastics Sales and Marketing Associate with Catherine A. Smith of the American Heart Association
5K – done! Southfield MI was rainy and cold, but that didn’t stop our 5K participants.

Keep up with thyssenkrupp and everyone at AIN Plastics. We would love to be cheered on as we head out to more events. To find out more about how you can participate in the American Heart Association Heart Walks visit their site. Although the Detroit Walk for 2016 is past, other locations across Michigan and in other states are still coming up this year – You can visit them at heartwalk.org.

 

 

Icon - Twitter Icon - LinkedIn Icon - GooglePlus Icon - Facebook

 

 

 

 

 

See you in the blogosphere again soon

Lisa Anderson

Marketing Manager
ThyssenKrupp Materials, NA
AIN Plastics Division


lisa_anderson_001CroppedAbout Lisa Anderson
Ms. Anderson has been ThyssenKrupp Materials AIN Plastics Division for over 4 years. She brings 20+ years of advertising, award winning graphic design, social media and marketing. She has worked in book publishing, advertising agencies, printing, manufacturing, and the apartment industry. Ms. Anderson has a Bachelor of Fine Arts in Studio Arts from Calvin College, Grand Rapids, MI.

AIN Plastics O&P Team Golfing for Charity

Hanger Charity Golf Challenge 2016 004thyssenkrupp Materials AIN Plastics Division has a team that is dedicated to the business of providing engineered plastic solutions for their customers. But the team also enjoys taking part in events in their communities, from tkactive 5K walks and bike rides, to collecting shoes for Soles for Souls the team at AIN is always looking for, and finding, fun ways to be involved in their local communities and to help others.

On Thursday, April 21, 2016, Dick Cubero (AIN Plastics Florida Branch) and Scott Moore (AIN Plastics Industry Segment Manager for Orthotics and Prosthetics) enjoyed a day on the golf course as participants in the 13th Annual Hanger Clinic Golf Challenge held at the Kissimmee Bay Country Club in Kissimmee, Florida. To learn more about Hanger Clinics visit them online.

This annual charity golf event supports Our Children’s Rehab Center, Inc. located in Winter Haven Florida.

The Winter Haven Children’s Rehab Center is dedicated to facilitating each child’s maximum independence and communicative abilities by a team that includes a Speech Language Pathologist, and Occupational and Physical Therapist who use innovative interventions when working with newborns, infants, toddlers and children through 21 years of age.

Hanger Charity Golf Challenge 2016 003Last year’s Annual Hanger Golf Outing, in which AIN Plastics also participated and sponsored, raised an incredible $8,500 for the rehab center.  Donations and sponsorship dollars from the annual golf outing have provided funds for a variety of programs and projects throughout the years.

• Therapeutic Gym
• The creation of a Sensory Garden
• New school bus with wheelchair lift
• Adapted horse tack for therapeutic riding
• The purchase of a prone stander to allow children in a wheelchair to be upright

Moore said, “I am truly proud to work for a company that is not only dedicated to the Orthotics, Prosthetics and Pedorthics industries but a company that cares and gives back to the local communities.”

FYI – If you would like to learn more about AIN Plastics O&P Program please join us online:

linkedin-logo-Icon

AIN Plastics for Orthotics and Prosthetics

O&P Corner on the AIN Plastics Blog. Here you’ll find videos and downloads of our literature.

See in the blogosphere again soon!

lisa_anderson_001CroppedAbout Lisa Anderson
Ms. Anderson has been ThyssenKrupp Materials AIN Plastics Division for over 4 years. She brings 20+ years of advertising, award winning graphic design, social media and marketing. She has worked in book publishing, advertising agencies, printing, manufacturing, and the apartment industry. Ms. Anderson has a Bachelor of Fine Arts in Studio Arts from Calvin College, Grand Rapids, MI.

Jerry Lane Retires from AIN Plastics

In a time when the average person holds approx. 10 different jobs throughout their career the plastics industry stands out. It is often said that plastics chooses you and once you start working in plastics you stay in the business. For AIN Plastic’s Jerry Lane that has been a very true statement, but after a lifetime in plastics distribution Jerry Lane is saying ‘bon voyage’ and heading into what we all hope will be a long and happy retirement.

I sat down with Jerry and chatted with him about his time in the plastics industry and how it lead to a lifelong career with the majority of those years being at AIN Plastics.

IMG_1301

A Memento of the original AAA Plastics Supply

One of the first things we talked about is what has been the biggest change Jerry has seen in the plastics industry at large. After graduating Babson College in Wellesley 20 miles west of Boston Jerry joined the Coast Guard Reserves and was accepted into a Masters Degree program. 1966 Jerry went to work for his father who had a small plastics distribution company called AAA Plastics Supply. In 1985 this company merged with AIN Plastics which had 5 locations and was looking to expand and AAA Plastics Supply was a good fit. It was in Boston and then Norwood for 16 years before settling in Canton which is the current AIN location. Jerry reminisced that this past Washington’s birthday was the 31st anniversary of agreeing to the terms with Norman and Alex (The original A and N in AIN Plastics) to merge his family’s business with AIN Plastics. On April 19 of that year the formal agreement was signed and he began with AIN. Jerry feels this type of merger has been the biggest change overall in the industry. “There has been a huge consolidation of independent distributors. 30 years ago there were many small entrepreneurs. Now there are fewer but larger.” Jerry went on to add “Most manufacturers were also domestic, now the majority of suppliers are foreign-based companies.”

Jerry also noted one other major change has certainly been the Internet. “The ability to search online has provided the ability to make people smarter. There are so many resources out there. People research and shop differently now.”

JerryLane

 

Jerry Lane working the phones at AAA Plastics Supply which became part of AIN Plastics.

One of the things that differentiated AIN Plastics during this time period was it’s internal structure and catalog systems. Jerry explained that AIN Plastics relied on a robust outcall program. He said one of Norman Drucker’s favorite sayings was, “if you aren’t taking a call you are making a call!” In the days before Internet AIN Plastics also managed a large catalog business with separate catalogs for different industries. The largest of these catalogs was a school catalog that was mailed to every school in the country, primarily to shop programs that would teach machining of plastics, metals and other materials. They also had a catalog that went out to distributors. As part of the catalog system one thing that has not changed is AIN Plastics was, and is, known for having strong inventory and fast shipping. The merging with thyssenkrupp Materials NA has only strengthened this aspect of AIN by becoming part of the thyssenkrupp nationwide logistics system.

When asked about what job he held at AIN Plastics Jerry says there have been many. Jerry says he started at the very beginning sweeping floor and doing warehouse work, but as he gained knowledge and experience Jerry has ended with a well balanced and broad career including time in:

• Corporate Operations and Management
• Corporate Quality
• Sales
• Freight and Logistics

Out of all those things, Jerry said one of the most gratifying times was on a recent trip to the AIN Plastics Yonkers facility. The team brought in a retirement cake and Inside Sales Representative George Marotta told Jerry we all wouldn’t be here is it wasn’t for the 2.5 years Jerry worked at our branch.

Of course no retirement chat would be complete without asking the question – What are you most looking forward to? After all, it’s the question we all ask ourselves about retirement or winning the lottery. For Jerry he says the first thing is to enjoy the city he and his wife and family have been a part of for so many years. “The first thing is site seeing beginning with Boston, and enjoying time with our new Grandchild due in just a short time. This will be our 2nd grandchild and first grandson.”

After that Jerry said in all his years of travel for work he has been to all of the AIN Plastics branches except TX and Missouri, “but I have not spent time in the actual cities so we plan to tour the US and enjoy being tourist travelers.”

Lastly we talked about what Jerry will miss the most. He said the AIN people are such a big part of his life and that will be what he misses the most. He went on to say, “I have a couple of projects that I know I won’t get to see finished that I know will be really good for company so I really will miss seeing those to their completion. But, there will always be those projects because it’s a part of our future and how we are growing.”

From here, Jerry will be handing over the logistics portion of his job to Lydia Gonzalez who has worked with Jerry for 24+ years. Jyoti Gorur will expand her Financial Analyst job to include some reports Jerry did as well and Debbie Shunk will take on R&A items so everyone will be in good hands.

 

Best Wishes to you Jerry!

and to everyone else –

See you in the blogosphere again soon

 

Lisa Anderson

Marketing Manager
ThyssenKrupp Materials, NA
AIN Plastics Division


lisa_anderson_001CroppedAbout Lisa Anderson
Ms. Anderson has been ThyssenKrupp Materials AIN Plastics Division for over 4 years. She brings 20+ years of advertising, award winning graphic design, social media and marketing. She has worked in book publishing, advertising agencies, printing, manufacturing, and the apartment industry. Ms. Anderson has a Bachelor of Fine Arts in Studio Arts from Calvin College, Grand Rapids, MI.

AIN Plastics Madison Heights HQ Moving to Auburn Hills, MI

thyssenkrupp Materials AIN Plastics branch has greatly enjoyed it’s Madison Heights location for many years. However, growth has brought a need for a larger facility so the Corporate office of AIN Plastics will be moving to Auburn Hills, Michigan in April.

DSC_0345-New Saw 03-13

AIN Plastics Branch Manager, Jeff Garden

Branch Manager, Jeff Garden has been facilitating the move and stated, “we are on track to have our first day in Auburn Hills on April 20, 2016.” However, Mr. Garden also noted, “as with any big move we have a lot to do once we are in Auburn Hills so the branch will not be fully operational until April 26, 2016.” To that end, the Madison Heights Team including Inside Sales, Outside Sales, Warehouse fulfillment, and AIN’s Purchasing team, also housed at Madison Heights, has been working hard to ensure a smooth transition into the new facility. Jeff added, “everyone is really looking forward to the space which will be approximately double in size from the current Madison Heights location.”

The staff asks that if you are planning to come to the branch between April 20 and April 26 that you call ahead. 877.246.7700.

 

The new address for the AIN Plastics Michigan Branch is:

thyssenkrupp Materials NA

AIN Plastics Division

10 Corporate Drive

Auburn Hills, MI 48326

Oh but what about the phone number? No worries! The phone number is still 877.246.7700. This phone number for AIN Plastics will automatically put you in contact with your nearest branch.

As for what the new site looks like, we have a few photos to share and word is it will be bright and modern. We will share more here and on our social channels in the weeks ahead.

LinkedIn 

Facebook

Twitter

 

A Sneak Preview of the new Auburn Hills Facility. The walls are going up and things are beginning to take shape.

Thermoplastic Valve and Seal Materials

Table comparing the pros and cons of commonn thermoplastics used in valve and seal applicationsIn our last post on the topic of thermoplastic pumps and valves we looked at how corrosion occurs with thermoplastics. In this article we are looking at the specific materials of choice that are most often used when designing valves and seals with thermoplastics.

As with traditional materials like metal or even wood thermoplastics all have advantages and disadvantages. In my work here at AIN Plastics my job is often to help customers look at all the pros and cons and help determine the best engineering plastic for a particular application.

The task of selecting the right thermoplastic for a machined valve or seal can be detailed and sometimes daunting when you see all the thousands of options available in the market today. Throw in trade names for engineering plastic materials and it can become even more confusing. Many plastic materials exist in their basic form but there are also versions that have certain properties boosted by the addition of fillers like ceramic, graphite and more. Still others, like Dupont™ Vespel®, are made through a proprietary isostatic molding process making it the only one of it’s kind in the plastics industry.

Below is a table I’ve put together as a good starting point for detrmining what type of thermoplastic may be best suited to a job. This table explains the basic advantages and disadvantages of the most popular engineering plastics for pump and valve as well as many other machined part applications. Once the basic crietria are determined, the next step is often making the initial part and testing. From there designers may find a need to move to a material with a filler to, for example, enhance the heat resistance properties.

On the surface some of these engineering plastics appear costly. But, when material selection is done carefully it is often the case that customers are pleasantly surprised to find plastics end up costing less overall. This is due to reduced maintenance time because parts last longer, or they don’t need lubrication. It may also be because you don’t need the most expensive material. While a PAI might have all the properties you need and then some, we might find a less expensive material with a filler can do the job just as well because it fits all the criteria needed.

 

 

For more ways to look at the differences of engineering plastics see our related infographic.

 

Montague-Sml-DSC_0304

Kendall Montague
Industry Segment Manager

thyssenkrupp Materials NA
AIN Plastics Division

Kendall Montague is a veteran of the plastics industry with 16+ years experience working with OEM and MRO engineers assisting in developing thermoplastics material selection as well as custom design and fabrication using CNC equipment.

Active Member with the Energy & Polymer Group – Houston
linkedin-logo-Icon

 

Designing with Thermoplastics in Pump & Valve Components

Why are thermoplastics (engineering plastics) replacing metals and becoming a popular option for machined parts? To answer this question we’ve got a few blog posts that look at different aspects of why people are saying yes to engineering plastics. Pumps and valves have been around for about as long as humans have been constructing things to make life easier. Today pumps and valves occupy places in nearly every industry from medical, laboratory and testing equipment, to oil and gas, agriculture, transportation, buildings and more.

Designing pump and valve components from thermoplastics has the benefit of being made from materials that are corrosion resistant. But, even plastics withstand varying physical elements in different ways so it’s important to understand how plastics can also be affected by the physical elements they will be exposed to. The chart below looks at some of the most common plastic resins and gives a general guideline for how they stand up to potential corrosive elements.

 

Chart of Chemical Resistance for Common Polymer Resins / Thermoplastics

 

CHEMICAL RESISTANCE POLYMER RESINSA Deeper Look at Corrosion and What it Is
Corrosion is the deterioration of a material and its physical properties, Corrosion of a material occurs because of an undesirable reaction with its surrounding environment. In valve applications chemicals may attack the exterior as well as the interior surfaces. As you can see from the chart above both acids and alkalis will attack some materials. Corrosion begins with pitting that is not even visible to the eye. But once it begins corrosion continues to grow and eventually it leads to part failure. But even before creating a leak, pits increase turbulence which affects performance.

Corrosion is caused by more than just hazardous chemicals. As you can see from the chart of common thermoplastics above, sometimes an apparently benign fluid can react, as when sea water flows over brass.

How Can Corrosion of Machined Parts Be Stopped?

The best and most cost-effective way of controlling corrosion is preventing it. Studies have shown that an overall cost savings of 40% can be achieved when corrosion is prevented rather than treated. Prevention entails selecting an engineering plastic that will work best with the media being transported through the device. Whether you are using metals or thermoplastics, all environmental factors should be considered, including cleaning agents and things that might not be thought of as highly corrosive. In some cases a sacrificial layer could be used but these will have a finite life, and as the name implies the sacrificial material needs to be closely monitored and it will still require downtime to apply a new sacrificial layer.

Many customers that replace metal valves and gaskets with engineered plastics often note a number of positive benefits even if the initial part costs more.

  • Reduced maintenance
  • Reduced Downtime 
  • Reduced incidence of part failure
  • Longer lasting parts
  • Overall cost savings
  • Smooth surfaces allow for increased velocity and precision control of flow

Customers with ultra-high purity such as medical device, food processing, or water treatment applications to name a few, require very smooth interior surfaces with absolutely no place for contamination to lurk and with no risk of particles breaking free and joining the fluid. Even microscopic pitting can be cause for parts to be replaced because the pitting can allow for bacteria contamination. Once pitting occurs it is virtually impossible to clean a valve or gasket to the high standards required for high purity applications.

The highly smooth surfaces that can be achieved with machined thermoplastic materials can also reduce turbulence in fluids being transported. This allows for fluids to flow at higher velocities and allows for precision control of pumps.

Beginning with careful material selection, research and talking to experienced plastic professionals can lead to designing pump and valve components that can improve performance and increase life from day-to-day to your most demanding applications.

Do you have questions about material selection for seals and valve gaskets like:

What are the lower cost and lighter weight options to metal-to-metal sealing?

We are having thermal degradation issues with plastics in valve components, can we improve this?

Our seals and gaskets have to withstand higher and higher operating pressure. What  materials have higher compressive capabilities and creep resistance?

These are all questions I am able to assist you with. Feel free to contact me at the information below.

 

 

Montague-Sml-DSC_0304Kendall Montague
Industry Segment Manager

thyssenkrupp Materials NA
AIN Plastics Division

 

Kendall Montague is a veteran of the plastics industry with 16+ years experience working with OEM and MRO engineers assisting in developing thermoplastics material selection as well as custom design and fabrication using CNC equipment.

Active Member with the Energy & Polymer Group – Houston
linkedin-logo-Icon

AIN Plastics Renews with DuPont for Vespel

In 1993, AIN Plastics was appointed E.I. DuPont’s first national distributor of Vespel® polyamide stock shapes, one of the industries most sophisticated materials. This month thyssenkrupp Materials NA AIN Plastics Division is proud to be continuing its relationship with DuPont, and now DOW with its renewal of the distribution agreement to continue as the Authorized Vespel® Stock Shapes Distributor for the Eastern half of the US and Canada. DuPont™ Vespel® continues to be the material of choice for high performance applications and it remains unmatched for its unique combination of properties achieved through DuPont’s proprietary Isostatic Molding Process. As for AIN Plastics, we have finalized and agreed upon an extension of our Distribution Agreement with DuPont.

Changes in the Plastics Business make Front page news!

As the Sales and Marketing Manager for DuPont™ Vespel® Authentic Shapes for thyssenkrupp Materials NA AIN Plastics Division, I get to live and breathe High Performance Plastics.  DuPont™, who invented DuPont™ Vespel® as well as Teflon®, Delrin®, and a multitude of other Engineering Resins known throughout the world, has been a partner with thyssenKrupp MAterials AIN Plastics Division for over 30 years. Through that time frame we

Space ShuttleFlying In The Sky. 3D Scene.

have seen 5 US presidents, the era of the space shuttle, the invention of the Internet, and mobile phones going from the size of a shoebox to being a must-have business and personal communication and entertainment device that fits in our pocket.  Through all of this, steady as a rock, DuPont was DuPont.  Always a technical leader, always an innovation resource in engineering plastics industry, DuPont materials and DuPont™ Vespel® are often considered the Gold Standard by which other plastics were measured.  So recently iStock_000060987992_Doublewhen the announcement that DuPont is merging with Dow was made it was an unexpected piece of news. But it is news that I look to as exciting.

What makes this announced merger of DuPont and DOW so exciting is the potential it brings to the table for more innovation.  This acquisition is called a “merger of equals” for good reason. Dow has a long history of technical advances in the Polyethylene business as well as other performance plastic families.  Meanwhile DuPont has been the leader in nylons and acetals stock shapes and injection molding materials.  I can only imagine what kind of new products these two technical companies and their extensive teams will dream up once they are together.

We will of course be watching as this proposed merger makes it’s way through all the legal channels and we look forward to the future with the new combined DOW DuPont. Feel free to contact us if you have any questions and I will be more than happy to help. To give you more information I’ve added a few links below to new and press releases about the DOW DuPont merger.

 

Press Release Regarding the DOW / DuPont Merger

The Washington Post Takes a look at DOW DuPont Merger and Company histories

USA Today DOW DuPont Merger News and Video

 

Photo-Hanson-DSC_0295Paul Hanson

Industry Segment Manager, DuPont™ Vespel®
thyssenkrupp Materials NA
AIN Plastics Division

Blog contributor Paul Hanson has been active in the Sales and Marketing of Engineering Plastics for over 20 years.  From Aerospace to Semicon, Paul’s expertise has been valuable to his customers and a key resource in specifying High Performance materials in demanding applications.

 

linkedin-logo-Icon

 

Connect with Paul on LinkedIn

email Paul Hanson at: paul.hanson@thyssenkrupp.com

AIN Plastics Working with the Future

Students at the University of Toledo come away with a lot of knowledge and skills when they graduate. This premier University offers many challenging courses that prepare students for careers in their field of their choice as well as a number of extracurricular programs and groups to aid in students success. John Shepherd, President of AIN Plastics and a UT alum was recently asked to be a part of the educational opportunities provided through the APICS group.

APICS is a group focused on learning the ins and outs of everything in Supply Chain Management. APICS has regular meetings in which students have workshops on things important to their future career in supply chain management. Things they might not see in the classroom, like how to build a resume, networking and what types of jobs are available for people in supply chain management now and in the future.

As part of this, John Shepherd, presented to students some real world experiences of how thyssenKrupp Materials NA utilizes supply chain management in their daily operations, planning and long-term goals. Students got to learn about the engineering plastics that the AIN Plastics Division supplies as well as a look what other thyssenkrupp divisions do. Mr. Shepherd also took a number of questions and enjoyed lively discussions with all attendees. All attendees were also invited to take part in a LinkedIn photo shoot provided by the AIN Plastics Marketing Department. Students were able to walk out with a professional photo to add to their LinkedIn profile, resume etc.

As a company thyssenKrupp Materials NA values the knowledge and fresh ideas that students and recent graduates bring to business. To assist students further with their learning opportunities thyssenkrupp MAterials NA provides a robust Intership program as well as a Sales Talent Development Program. “Reaching out to students is a way to work with the future of business, and letting students know what opportunities are available is a win for everyone,” noted Mr. Shepherd. AIN Plastics has been actively involved in providing Internships, and they have two recent graduates of the Sales Talent Development Program. Becca Reidy and Louis Szilagyi are both full-time Inside Sales Representatives for AIN Plastics Dallas Branch after finishing their time with the Program earlier this year. AIN Plastics also take part in outreach including job fairs and events like the APICS meetings on a regular basis. As an alumni John Shepherd has taken part in a number of University of Toldeo events including Job Fairs and the APICS meetings.

 

To learn more about APICS at Univerity of Toledo they can be reached by email directly at ut.student.apics@gmail.com

or on their website at http://www.apics.org

To learn more about thyssenKrupp Materials NA and the AIN Plastics Division stay tuned to this blog and visit us on social media.

 

 

 

AIN Plastics Lancaster, PA Going Strong After Tornado

AIN Plastics up and running with no downtime after tornado hits Lancaster, PA Branch

AIN Plastics in Lancaster, PA was struck by a tornado in the early hours of Wednesday, September 30th.  Fortunately, the extent of the damage was not as extensive as it first looked. The flow of daily operations was not interrupted. Orders, shipments and sales calls were routed immediately through other AIN Plastics locations.

Within a short two days the Lancaster Sales Team had workspaces set up at a temporary sales office in the City of Lancaster. In addition, AIN acquired a temporary warehouse facility just ten minutes from our regular location on Running Pump Road. All inventory had been moved into this facility for immediate shipments and as of Monday, October 5, just five days after the strike of the tornado all orders are shipping from AIN Plastics PA as normal.

Branch Manager, Terry Tewell stated that, “the team at AIN Lancaster would like to thank all of our associates from the other AIN Plastics facilities for their assistance in shipping our orders out immediately. We would also like to thank ThyssenKrupp Corporate and AIN Plastics Senior Management for all of their support and quick actions. Most of all, we would like to thank the Community of Lancaster and our Customers that have supported us throughout this event.”

Bayer Material Science Now Covestro

As a distributor of Engineering Plastics AIN Plastics has had a long and great relationship with Bayer Material Science. Now, we here at AIN are pleased to be carrying on this same great relationship with Covestro. The company formerly known as Bayer Material Science is now a legally independent company that is still a full subsidiary of Bayer AG.

As a distributor we are looking forward to working with the same great materials and people and we are eager to see what the future brings now that Covestro stands on its own. Although some things remain the same, the change to Covestro is more than a pretty new logo. It is an opportunity that has been embraced by the Bayer team to reflect on it’s goals and it’s purpose and with that has come a new vision that Covestro released along with their new logo:

Covestro Logo Blk Txt CMYK“Making the World a Brighter Place”

In a recent press release Covestro’s CEO Patrick Thomas stated “We fulfill this vision by inspiring innovation and driving growth through profitable technologies and products that benefit society and reduce environmental impacts.”

As has been the case in the years leading up to the change, Covestro and AIN Plastics have worked with customers throughout just about every industry from high tech aerospace, defense and automotive to the demanding applications of medical device, food processing, orthotics and prosthetics and on into fine art preservation and architecture. It’s a broad range and Covestro has the high quality materials needed to supply them all. In addition, one of the things that has made the AIN Plastics / Bayer partnership so successful is our shared focus on continuous growth of industry knowledge that we bring to our customer service. As a company Covestro employs approximately 14,000 workers around the globe and according to news reports that number may be increasing soon. The US headquarters will remain in Pennsylvania where they are already sporting the bright new logo on signs around the property.

AIN Plastics is looking forward to our continued partnership with Covestro. As a top manufacturer of polycarbonate resins, sheets and shapes AIN Plastics is happy to continue stocking and selling their materials. Our team will be on the front line of learning about new Covestro materials and applications in the months and years to come, and as always, everyone at AIN Plastics will be eager to assist customers in finding that just right engineering plastic for their application.

 

 

 

For more information and articles about Bayer Material Science’s transition to Covestro see these links:

Bayer US Website

Pittshurgh-Post Gazzette

Wall Street Journal

 

See you in the blogosphere again soon!

Lisa Anderson

Marketing Manager
ThyssenKrupp Materials, NA
AIN Plastics Division


lisa_anderson_001CroppedAbout Lisa Anderson
Ms. Anderson has been ThyssenKrupp Materials AIN Plastics Division for over 3 years. She brings 20+ years of advertising, award winning graphic design, social media and marketing. She has worked in book publishing, advertising agencies, printing, manufacturing, and the apartment industry. Ms. Anderson has a Bachelor of Fine Arts in Studio Arts from Calvin College, Grand Rapids, MI.